High Carbon Wire Hydraulic Pressure Crimped Wire Mesh Weaving Machine

I. Description
Illustration of working principle:
The series of Hydraulic Pressure Crimped Wire Mesh Weaving Machine  weave crimped wire net of steel, iron, lead and stainless steel with big diameter. The net is weaved by the machine after the thick wire is formed to crimp by the rolling machine. The width of net is 0.9-2.5m and the diameter of wire is 5-12mm. The size of the mesh is 10*10--100*100mm.
Application: Owing to its solid structure, the net is used in many aspects such as industry, agriculture, architecture and feed etc.
Advantages: The structure of the machine is compactness and rational. It performs satisfactorily and runs smoothly. The machine produces wire net mesh with special process. So the size of the mesh is invariable.
II.Technical parameter 
Model  DPCM-4
Wire diameter 5-12mm
Mesh opening size 10mm-100mm
Max width of mesh  2.5m
motor 3.0 kw
Production 10 pieces/min
Dimension  3500*3000*1800mm
Weight 1800kg 
III.Commercial terms
1. FOB price:  Hydraulic Pressure Crimped Wire Mesh Weaving Machine(Mesh Width:2.5m):  7150USD FOB Xingang Port, China                  (Mesh Width:2.0m):5250 USD FOB Xingang Port, China  
                Wire Coiling Machine                       3250 USD FOB Xingang Port, China  
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1 set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in your factory.
IV. Contact Information

Hebei Jiake Welding Equipment Co.,Ltd. (Manufacturer) 
Factory Add: Wire Mesh Industrial Zone, Anping County, Hebei, China.
  Tel: +86-311-80796161                           Fax: 86-311-86053790 
Mob: +86 13739793517              
URL: www.dapumachinery.com 

Copper Component Products

Copper gets used commercially in most electrical products as superfine wire or circuits. If the circuits and wires are maintained during use and they have no flaws than they are perfect for recycling as scrap metal. Circuit board recycling is a common way to get high-quality copper This also means the surface of the copper is in excellent condition. Recycling copper for the best price and future repurposing is getting designated a grade `A` quality product.

Copper acquired from power cables is also a fine wire with high connectivity. The quality is slightly less high than for commercial electronics, but it has a reduced amount of impurities. This type of wire will have a minimum amount of impurities, but when heated and mixed with a higher grade copper the high-grade copper will be diluted. This makes the wire reusable.

To study effect of the different metal additive manufacturing techniques on microstructural evolution, phase constitution and the relationship between the microstructure and tensile behavior of pure Cu parts, components were manufactured by selective laser melting (SLM) technology and cold spraying (CS) technology, respectively.

Copper Lead Frame,Copper Bonding Wire,Copper For Semiconductor Connector,Copper Microelectronic Components

Shandong Hitech Metal Material Co., Ltd , https://www.sdhitech.com