Paint/Spray Booth Garage Equipment for 4s Shop
Basic Info
Model NO.: CDSP-101Heating Mode:Â Diesel
Paint Mist Treatment:Â Dry-type
Condition:Â New
Trademark:Â Autocare
Transport Package:Â Polyfoam and Metal Frame
Outside Size:7050mm*5200mm*3600mm
Inside Size:6900mm*3900mm*2750mm
Origin:Â China
HS Code:Â 84198990
Product Description
| SPECIFICATIONS of AC-6900 SPRAY BOOTH | |||
| Dimensions | Length (mm) | Width (mm) | Height (mm) |
| Booth Outside | 7,050 | 5,250 | 3,600 |
| Booth Inside | 6,900 | 3,900 | 2,750 |
| Entrance Door | 3 folds,size is 3,000×2,700mm(W×H),with tempered glass embedded into square frame made of color steel.Equipped with Handle & Lock | ||
| Personnel Door | Size: 800×2,000mm(W×H),with tempered glass embedded into square frame made of color steel.Equipped with Handle & Anti-Explosion Lock | ||
| Plenum Chamber | 700mm high, all spare parts of plenum are made of galvanised bended steel and treated by white powder for long using life. |
||
| Walls Panel | 50mm EPS foam panel or rock wool for option | ||
| Basement System | Grid Plates (Galvanized)* 2rows, made of 30x4mm flat bar and 10mm twisted steel,surface galvanised treatment,equipped with filter supporting frame.loading weight is 600KG/wheel. | ||
| Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
| 2 ramps,each size 800x2,000mm(WxL) | |||
| Heating System | Diesel Burner*1unit (Italy RIELLO, G20) heating capacity is 200,000Kcal/H | ||
| Heating Exchanger*1unit 200kw, made of 1.5mm stainless steel SUS304,round type multi-cycle,radiatorpipe, equipped with safe anti-explosion hole, 1M stainless steel chimney, 3M long bended galvanised steel chimney and 1Â pc of rain shield. | |||
| Cabinet*1unit,rock-wool insulation. Cabinet Frame is made of 1.5mm thick bended galvanised steel, three way connector made of alluminium alloy. | |||
| Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
| ceiling Filter* 1set, filtering rate >Â 97% | |||
| floor paint-stop Filter(paint-stop filter)* 1set, filtering rate >Â 70% | |||
| Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
| Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
| Belimo NMU230 20NM electric damper | |||
| Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
| Illumination | Ceiling Lights *Â 32pcs, 20w LED lamp, with Light Fixtures, anti-explosion design | ||
| Side Lights *Â 32pcs,20w LED lamp, with Light Fixtures, anti-explosion design | |||
| Illumination ≥1000LUX | |||
| Control Panel | *1unit,Button type control box, with main switch, and set with normal temperature spraying, constant temperature spraying, baking switch, lighting switch, temperature time setting, emergency stop, failure alarm, time accumulator etc. | ||
| ** Included | All Hardware, Fasteners, and Sealants, Installation CD Video, and Drawing. | ||
Detailed Photos of Paint Booth & Our Factory
Â
Basic Info
Model NO.: CDSP-101Heating Mode:Â Diesel
Paint Mist Treatment:Â Dry-type
Condition:Â New
Trademark:Â Autocare
Transport Package:Â Polyfoam and Metal Frame
Outside Size:7050mm*5200mm*3600mm
Inside Size:6900mm*3900mm*2750mm
Origin:Â China
HS Code:Â 84198990
Product Description
| SPECIFICATIONS of AC-6900 SPRAY BOOTH | |||
| Dimensions | Length (mm) | Width (mm) | Height (mm) |
| Booth Outside | 7,050 | 5,250 | 3,600 |
| Booth Inside | 6,900 | 3,900 | 2,750 |
| Entrance Door | 3 folds,size is 3,000×2,700mm(W×H),with tempered glass embedded into square frame made of color steel.Equipped with Handle & Lock | ||
| Personnel Door | Size: 800×2,000mm(W×H),with tempered glass embedded into square frame made of color steel.Equipped with Handle & Anti-Explosion Lock | ||
| Plenum Chamber | 700mm high, all spare parts of plenum are made of galvanised bended steel and treated by white powder for long using life. |
||
| Walls Panel | 50mm EPS foam panel or rock wool for option | ||
| Basement System | Grid Plates (Galvanized)* 2rows, made of 30x4mm flat bar and 10mm twisted steel,surface galvanised treatment,equipped with filter supporting frame.loading weight is 600KG/wheel. | ||
| Diamond Plates (Powder Coated or Galvanized)* 3rows | |||
| 2 ramps,each size 800x2,000mm(WxL) | |||
| Heating System | Diesel Burner*1unit (Italy RIELLO, G20) heating capacity is 200,000Kcal/H | ||
| Heating Exchanger*1unit 200kw, made of 1.5mm stainless steel SUS304,round type multi-cycle,radiatorpipe, equipped with safe anti-explosion hole, 1M stainless steel chimney, 3M long bended galvanised steel chimney and 1Â pc of rain shield. | |||
| Cabinet*1unit,rock-wool insulation. Cabinet Frame is made of 1.5mm thick bended galvanised steel, three way connector made of alluminium alloy. | |||
| Filter System | Primary Filter* 1set, filtering rate >Â 83% | ||
| ceiling Filter* 1set, filtering rate >Â 97% | |||
| floor paint-stop Filter(paint-stop filter)* 1set, filtering rate >Â 70% | |||
| Air System | Air-Intake Fans* 2units, Centrifugal Fans with 4Â KW motor each | ||
| Air-Exhaust Fan* 1unit, Centrifugal Fans with 5.5 KW motor | |||
| Belimo NMU230 20NM electric damper | |||
| Cabinet for the fans* 1unit, and Air Ducts* 3pcs, and Air Damper (electric)* 1unit | |||
| Illumination | Ceiling Lights *Â 32pcs, 20w LED lamp, with Light Fixtures, anti-explosion design | ||
| Side Lights *Â 32pcs,20w LED lamp, with Light Fixtures, anti-explosion design | |||
| Illumination ≥1000LUX | |||
| Control Panel | *1unit,Button type control box, with main switch, and set with normal temperature spraying, constant temperature spraying, baking switch, lighting switch, temperature time setting, emergency stop, failure alarm, time accumulator etc. | ||
| ** Included | All Hardware, Fasteners, and Sealants, Installation CD Video, and Drawing. | ||
Detailed Photos of Paint Booth & Our Factory
Â
Plate And Tube Integrated Cutting Machine
1. Plate and tube processing, one machine for two purposes, saving space
2. High-load mechanical structure bed, stable processing and high precision
3. Customized laser generator with small slits and less energy consumption
4. Full stroke chuck, tube diameter up to 220mm
5. Short tail material, cost saving
6. The X-axis frame beam is annealed to eliminate internal stress. After rough machining, vibration and aging are carried out before finishing to ensure the rigidity and stability of the moving parts of the cutting head.
7. The bed is equipped with high-quality linear guides, driven by servo motor, high-quality rack and pinion, so that the Z-axis slide plate can achieve reciprocating motion in the X direction.
8. In the process of movement, the limit switch controls the stroke to limit the limit, and there are elastic buffer pads at both ends to limit the mechanical limit to ensure the safety of the system operation.
9. Machine base: frame structure welded with high-quality pipes, professional welding, secondary aging treatment, and precision machining by large-scale gantry milling machines. These design and processing methods ensure that the machine tool has excellent shock resistance, high rigidity and stability.
10. A dust cover is installed on the guide rail to prevent dust debris from falling into the guide rail to affect the movement, keeping clean and smooth movement.
Plate And Tube Integrated Cutting Machine,Plate And Tube Integrated Laser Cutting Machine,Plate And Pipe Laser Cutting,Sheet And Pipe Fiber Laser Machine
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.nbctkcutting.com