Model | KSU-200T | KSU-300T | KSU-400T |
Injection volume(cc) | 2000 | 2000/3000/4000 | 3000/4000/5000 |
Injection speed(cc/min) | 5000 | 5000 | 5000 |
Injection Pressre(Mpa) | 188 | 188 | 164 |
Clamping force(KN) | 2000 | 3000 | 3000 |
Heating plate size(mm) | 600*600 | 700*700 | 700*800 |
Mould open stroke(mm) | 500 | 550 | 600 |
Max. heatin plate space(mm) | 550 | 600 | 700 |
Min. mould tickness(mm) | 60 | 60 | 110 |
Electrical power(KW) | 15 | 18 | 27 |
Horse power(HP) | 15 | 20 | 30 |
Gross weigt(KG) | 7000 | 9000 | 11000 |
Machine size(L*W*H mm) | 2400*2400*3500 | 2700*2600*4000 | 3400*2800*4500 |
NO. | Item | Branch/Material | Remarks |
1 | motor | Taiwan Tatung | Large torque type, quiet and silent |
2 | Oil Pump | Japan YUKEN | Collective style circuit design |
3 | PLC | Germany's Siemens | Independent written, easy to operate |
4 | LCD touch screen | Germany's Siemens | Clear and intuitive, convenient, easy to operate |
5 | Heating pipes | Taiwan branch | Nickel-chromium alloy wire, never rust |
6 | Oil seal | Japan NOK | Wear-resistant, durable, no leakage |
7 | Solenoid valve | Northman | Controlled fast, long life |
8 | Other electrical configuration |
Germany's Siemens | Performance and stability |
9 | Thermocouple Module | Germany's Siemens | Using PID correction, temperature uniform distribution, the error value at ± 3 ºC |
10 | Pressure sensor | Denmark TRAFAG | Conduction pressure accurate, unbiased, and easy to use |
11 | Heating control system |
Taiwan Solid State Relays |
temperature uniform distribution, the error value at ± 3 ºC |
12 | Machine body casting | FCD50 Ductile Iron | Aging passivation, high tensile strength |
13 | Column | Carbon Steel | Hardness up to HRC55--58 |
14 | Screw barrel | Zhejiang Huaye | Â |
15 | Proportional flow pressure valve |
Japan YUKEN | Specific pressure ratio flow control system, precise control of flow and pressure |
16 | Digital modules Analog Modules |
Germany's Siemens | Can accurately input and output |
This kind of Stator Powder Coating Machine can meet the requirement of different stator dimension. It makes the whole powder coating process far more iconvinient than by manual. This machine can also be connected to Stator Production Line to meet the mass production requirement.
Therer are two different powder method, one is for stator coil, the other is for the stator slot. The powder coating process is very sample by machine. Firstly, operator load stator on the fixture. Then press start button. Machine will do the rest process, including powderiing, blowing, powder recycling and ect. The powder time and material is as per customer's requirement.
Stator Powder Coating Machine
Stator Powder Coating Machine,Stator Coil Powder Coating Machine,Commutator Motor Powder Coating Machine
Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com