Long Tube Type (Without Guide Rod) | ||||||
Model | Measure Range | Length(mm) | D1 | D2(mm) |
Accuracy: ±4 Pressure: ≤1Mpa Temperature :0~60 °C |
|
Socket-end Connection Size (mm) |
BSP Thread Connection Size | |||||
LZB-15S |
2-20 L/h 3-30 L/h 4-40 L/h 5-50 L/h 6-60 L/h 10-100 L/h 16-160 L/h 25-250 L/h 40-400 L/h 50-500 L/h 60-600 L/h 100-1000 L/h |
280 |
Φ20 | G½" | Φ45 | |
LZB-25S |
100-1000 L/h 160-1600 L/h 250-2500 L/h 300-3000 L/h |
380 |
Φ32 | G¾" | Φ70 | |
LZB-40S |
0.4-4 m³/h 0.6-6 m³/h 1-10 m³/h |
420 |
Φ50 | no thread connection | Φ87 | |
LZB-50S |
0.4-4 m³/h 0.6-6 m³/h 1-10 m³/h |
435 |
Φ63 | G1½" | Φ98 | |
1.6-16 m³/h(with guide rod) | ||||||
LZB-100S |
8-50 m³/h 10-60 m³/h 14-90 m³/h 18-150 m³/h 18-120 m³/h 20-180 m³/h 20-200 m³/h 20-220 m³/h |
555 |
Flange Connection | |||
LZB-125S | ||||||
LZB-150S |
                                                         Short Tube Type (with guide rod) | ||||||
Model | Measure Range | Length(mm) | D1 | D2(mm) |
Accuracy: ±4 Pressure: ≤1Mpa Temperature :0~60 °C |
|
Socket-end Connection Size (mm) |
BSP Thread Connection Size | |||||
LZB-15S |
5-50 L/h 6-60 L/h 10-100 L/h 16-160 L/h 25-250 L/h 40-400 L/h 50-500 L/h 60-600 L/h 100-1000 L/h |
200 |
Φ20 | G½" | Φ45 | |
LZB-25S |
100-1000 L/h 160-1600 L/h 250-2500 L/h 300-3000 L/h |
230 |
Φ32 | G¾" | Φ60 | |
LZB-32S |
400-4000 L/h 600-6000 L/h |
288 |
Φ40 | G1" | Φ74 | |
LZB-50S |
0.4-4 m3/h 0.6-6 m3/h 1-10 m3/h 1.6-16 m3/h |
341 |
Φ63 | G1½" | Φ98 | |
LZB-65S |
3-16 m3/h 5-25 m3/h 8-40 m3/h 10-50 m3/h 12-60 m3/h |
430 |
Φ75 | G2" | Φ122 | |
LZB-80S |
3-16 m3/h 5-25 m3/h 8-40 m3/h 12-60 m3/h |
537 |
Flange Connection |
Plastic is a polymer compound polymerized by addition polymerization or polycondensation reaction with monomers as raw materials. Its resistance to deformation is medium, between fibers and rubber. It is composed of synthetic resins and fillers, plasticizers, stabilizers, lubricants, colorants and other additives.
According to the different characteristics of various plastics, plastics are divided into three types: general plastics, engineering plastics and special plastics.
According to the different physical and chemical characteristics of various plastics, plastics are divided into two types, thermosetting plastics and thermoplastics.
According to the different molding methods of various plastics, it can be divided into various types such as film pressing, lamination, injection, extrusion, blow molding, cast plastic and reaction injection plastic.
Processing methods include blistering, compression molding, extrusion molding, injection molding, blow molding, calendaring and so on.
Thermosetting Plastic,Biodegradable Plastic,First Man Made Plastic,Moldable Plastic
Guangdong Shunde Teamwork Model Technology Co., Ltd , https://www.gdtwmx.com