Long Tube Type (Without Guide Rod) | ||||||
Model | Measure Range | Length(mm) | D1 | D2(mm) |
Accuracy: ±4 Pressure: ≤1Mpa Temperature :0~60 °C |
|
Socket-end Connection Size (mm) |
BSP Thread Connection Size | |||||
LZB-15S |
2-20 L/h 3-30 L/h 4-40 L/h 5-50 L/h 6-60 L/h 10-100 L/h 16-160 L/h 25-250 L/h 40-400 L/h 50-500 L/h 60-600 L/h 100-1000 L/h |
280 |
Φ20 | G½" | Φ45 | |
LZB-25S |
100-1000 L/h 160-1600 L/h 250-2500 L/h 300-3000 L/h |
380 |
Φ32 | G¾" | Φ70 | |
LZB-40S |
0.4-4 m³/h 0.6-6 m³/h 1-10 m³/h |
420 |
Φ50 | no thread connection | Φ87 | |
LZB-50S |
0.4-4 m³/h 0.6-6 m³/h 1-10 m³/h |
435 |
Φ63 | G1½" | Φ98 | |
1.6-16 m³/h(with guide rod) | ||||||
LZB-100S |
8-50 m³/h 10-60 m³/h 14-90 m³/h 18-150 m³/h 18-120 m³/h 20-180 m³/h 20-200 m³/h 20-220 m³/h |
555 |
Flange Connection | |||
LZB-125S | ||||||
LZB-150S |
                                                         Short Tube Type (with guide rod) | ||||||
Model | Measure Range | Length(mm) | D1 | D2(mm) |
Accuracy: ±4 Pressure: ≤1Mpa Temperature :0~60 °C |
|
Socket-end Connection Size (mm) |
BSP Thread Connection Size | |||||
LZB-15S |
5-50 L/h 6-60 L/h 10-100 L/h 16-160 L/h 25-250 L/h 40-400 L/h 50-500 L/h 60-600 L/h 100-1000 L/h |
200 |
Φ20 | G½" | Φ45 | |
LZB-25S |
100-1000 L/h 160-1600 L/h 250-2500 L/h 300-3000 L/h |
230 |
Φ32 | G¾" | Φ60 | |
LZB-32S |
400-4000 L/h 600-6000 L/h |
288 |
Φ40 | G1" | Φ74 | |
LZB-50S |
0.4-4 m3/h 0.6-6 m3/h 1-10 m3/h 1.6-16 m3/h |
341 |
Φ63 | G1½" | Φ98 | |
LZB-65S |
3-16 m3/h 5-25 m3/h 8-40 m3/h 10-50 m3/h 12-60 m3/h |
430 |
Φ75 | G2" | Φ122 | |
LZB-80S |
3-16 m3/h 5-25 m3/h 8-40 m3/h 12-60 m3/h |
537 |
Flange Connection |
Reaction injection molding (referred to as RIM), an industrial molding process. An injection molding method that has a chemical reaction during the molding process. The raw material used in this method is not a polymer, but two or more liquid monomers or prepolymers are added to the mixing head in a certain ratio. Mix evenly under pressure, immediately inject into a closed mold, polymerize and solidify in the mold, and shape into a product. Because the raw materials used are liquid, the cavity can be quickly filled with less pressure, so the clamping force and mold cost are reduced, which is especially suitable for producing large-area parts.
Reaction Injection Molding Plastic,Plastic Rapid Prototype,Cnc Machining Plastic,Plastic Rapid Prototype
Guangdong Shunde Teamwork Model Technology Co., Ltd , https://www.gdtwmx.com