Why should do carbon cleaning for car?
There are many reasons for increased carbon deposition: incomplete combustion,poor oil quality,bad driving habit,long time low speed driving,poor air quality etc.The increased carbon deposit will heavily effect the vehicle performance,resulting in 90% of engine component failures,fuel consumption increased,excessive exhaust emission.
HHO carbon cleaner machine produce oxygen and hydrogen gas from water and enter into engine.Hydrogen gas will combine with carbon to form hydrocarbon.After combustion with oxygen gas,it will become high temperature water vapor out of the exhaust system.Carbon Cleaner liquid enhance cleaning effect,protect and extend engine components life.
Specification
Â
Model Number | CCS1500 |
AC Voltage Requirement (V) | 220, 1phase |
AC Current (A) | <15 |
Rated Power(KW) | 4.5 |
Max. Gas Output(L/h) | 1500 |
Max. Working Pressure (Mpa) | 2 |
Max. Water Consumption (L/h) | 0.85 |
Weight (kg) | 130 |
Dimensions - L*W*H (mm) | 1070*670*1000 |
Â
The effect of oxy-hydrogen engine carbon cleaning service
1. Good car engine performance.
2. Stable idling.
3. Remarkable fuel saving.
4. Exhaust black smoke disappeared, achieving emissions testing standard.
5. prolong engine parts life.
It suits all brands gasoline and diesel cars trucks buses.
Â
Automotive HHO Engine Carbon Cleaner machine
Car Carbon Cleaner Machine consumes just soft water and electricity to create oxy-hydrogen gas which feeds into to the engine for Cleaning the carbon deposits in engine and increasing the combustion efficiency of the existing fuel.
The engine carbon cleaning service will:
1. Maximize Fuel Efficiency
2. Increase Horsepower and Torque
3. Reduce Harmful Emissions
4. Extend Drivetrain Service Life
5. Eliminate Carbon Deposits
6. Auto repair the oxygen sensor and ternary catalyst, prolong engine life
 There is no pollution, no harmful gases or chemical additives to harm people, engines or the environment.Â
Â
Okay Energy carbon buildup cleaning automobile carbon removal machineÂ
Instead of traditional Disassembly and Foam Or Chemical liquid cleaning methods
1. consumes water + electricity to create oxy-hydrogen gas
2. input the oxyhydrogen gas into engine
3. cleaning time just 15 mins
4. remove the accumulated carbon and increasing the combustion efficiency of the existing fuel.
5. draining from exhaust pipe.
No need to remove engine, No harm to engine and human and environment. Save much cost.
It suits all brands gasoline and diesel cars trucks buses.
Â
Test Item |
Before |
After |
Reduction Rate |
||||||
MAX |
AVE |
MIN |
MAX |
AVE |
MIN |
MAX |
AVE |
MIN |
|
HC (PPM) |
205 |
196 |
175 |
65 |
56 |
48 |
68.3% |
71.4% |
72.6% |
CO (%) |
2.00 |
1.42 |
0.94 |
0.06 |
0.05 |
0.05 |
97% |
96.5% |
94.7 % |
CO2 Â(%) |
13.0 |
12.5 |
12.1 |
9.8 |
9.7 |
9.6 |
24.8% |
22.4% |
20.7% |
Â
Conclusion:
After using OKAY hho gas car engine carbon cleaning machine,carbon build-up is completely cleaned away,engine efficiency is increased,power and performance are restored,life expectancy is improved and engine emissions are reduced. The accelerator becomes light, horsepower is increased.
Reduce HC discharge (hydrocarbon) by 60.42%, CO 16.67%, CO2Â 20%. The fuel oil can be saved immediately by 10% and reach to 20% after running 500km.
Â
FAQ
1. Why I need to carbon-clean my car?
Incomplete combustion causes carbon deposits in your vehicle engine. The carbon is one of reasons of high fuel consumption, poor engine performance and increase exhaust emissions.
Â
2. What type of car can use your service?
All petrol, diesel or LPG vehicles,trucks,bus can use CCS1500 model.
Â
3. Will your service harm my car engine?
Absolutely not.Our service had been tested and proven effective by FCC.Â
Furthermore, it is being backed by a US$1million "Product Liability Insurance."
Â
4. When I need to carbon buildup out of engine
We recommend servicing your vehicle every 15,000km or 6 months, whichever come first. Â
Â
Okay Energy Equipment Co., Ltd which is the first oxyhydrogen generator in China,we have researched and produced hho generator for 11 years.
Main products:Oxy-hydrogen Generator,HHO Generator,Carbon Cleaning System,
Catalytic Converter Cleaning Machine,HHO welding Machine, water welding Machine etc.
Agents/Distributors/Dealers are warmly welcomed!
Changsha Okay Energy Equipment Co.Ltd
Adress:No.27,Wenxuan Road,Yuelu District,Changsha City,China
Tel:Â Â Â Â Â 0086-731-83979221
Web:Â Â Â www.okayenergy.com
Â
CCS1500 for engines processing time  | ||
Gas output (L/H) |
Engine capacity        (L) |
Time (min/time) |
600 | 1.0-3.0 | 20 |
800 | 3.0-5.0 | 20 |
1000 | 5.0-6.0 | 20 |
1500 | 6.0-7.0 | 30 |
1500 | 7.0-8.0 | 30 |
1500 | 8.0-12.0 | 40 |
1500 | >Â 12.0 | 60 |
PS: It is just a suggestion for engine cleaning time, please according to the actual situation to determine the specific cleaning time |
Why should do carbon cleaning for car?
There are many reasons for increased carbon deposition: incomplete combustion,poor oil quality,bad driving habit,long time low speed driving,poor air quality etc.The increased carbon deposit will heavily effect the vehicle performance,resulting in 90% of engine component failures,fuel consumption increased,excessive exhaust emission.
HHO carbon cleaner machine produce oxygen and hydrogen gas from water and enter into engine.Hydrogen gas will combine with carbon to form hydrocarbon.After combustion with oxygen gas,it will become high temperature water vapor out of the exhaust system.Carbon Cleaner liquid enhance cleaning effect,protect and extend engine components life.
Specification
Â
Model Number | CCS1500 |
AC Voltage Requirement (V) | 220, 1phase |
AC Current (A) | <15 |
Rated Power(KW) | 4.5 |
Max. Gas Output(L/h) | 1500 |
Max. Working Pressure (Mpa) | 2 |
Max. Water Consumption (L/h) | 0.85 |
Weight (kg) | 130 |
Dimensions - L*W*H (mm) | 1070*670*1000 |
Â
The effect of oxy-hydrogen engine carbon cleaning service
1. Good car engine performance.
2. Stable idling.
3. Remarkable fuel saving.
4. Exhaust black smoke disappeared, achieving emissions testing standard.
5. prolong engine parts life.
It suits all brands gasoline and diesel cars trucks buses.
Â
Automotive HHO Engine Carbon Cleaner machine
Car Carbon Cleaner Machine consumes just soft water and electricity to create oxy-hydrogen gas which feeds into to the engine for Cleaning the carbon deposits in engine and increasing the combustion efficiency of the existing fuel.
The engine carbon cleaning service will:
1. Maximize Fuel Efficiency
2. Increase Horsepower and Torque
3. Reduce Harmful Emissions
4. Extend Drivetrain Service Life
5. Eliminate Carbon Deposits
6. Auto repair the oxygen sensor and ternary catalyst, prolong engine life
 There is no pollution, no harmful gases or chemical additives to harm people, engines or the environment.Â
Â
Okay Energy carbon buildup cleaning automobile carbon removal machineÂ
Instead of traditional Disassembly and Foam Or Chemical liquid cleaning methods
1. consumes water + electricity to create oxy-hydrogen gas
2. input the oxyhydrogen gas into engine
3. cleaning time just 15 mins
4. remove the accumulated carbon and increasing the combustion efficiency of the existing fuel.
5. draining from exhaust pipe.
No need to remove engine, No harm to engine and human and environment. Save much cost.
It suits all brands gasoline and diesel cars trucks buses.
Â
Test Item |
Before |
After |
Reduction Rate |
||||||
MAX |
AVE |
MIN |
MAX |
AVE |
MIN |
MAX |
AVE |
MIN |
|
HC (PPM) |
205 |
196 |
175 |
65 |
56 |
48 |
68.3% |
71.4% |
72.6% |
CO (%) |
2.00 |
1.42 |
0.94 |
0.06 |
0.05 |
0.05 |
97% |
96.5% |
94.7 % |
CO2 Â(%) |
13.0 |
12.5 |
12.1 |
9.8 |
9.7 |
9.6 |
24.8% |
22.4% |
20.7% |
Â
Conclusion:
After using OKAY hho gas car engine carbon cleaning machine,carbon build-up is completely cleaned away,engine efficiency is increased,power and performance are restored,life expectancy is improved and engine emissions are reduced. The accelerator becomes light, horsepower is increased.
Reduce HC discharge (hydrocarbon) by 60.42%, CO 16.67%, CO2Â 20%. The fuel oil can be saved immediately by 10% and reach to 20% after running 500km.
Â
FAQ
1. Why I need to carbon-clean my car?
Incomplete combustion causes carbon deposits in your vehicle engine. The carbon is one of reasons of high fuel consumption, poor engine performance and increase exhaust emissions.
Â
2. What type of car can use your service?
All petrol, diesel or LPG vehicles,trucks,bus can use CCS1500 model.
Â
3. Will your service harm my car engine?
Absolutely not.Our service had been tested and proven effective by FCC.Â
Furthermore, it is being backed by a US$1million "Product Liability Insurance."
Â
4. When I need to carbon buildup out of engine
We recommend servicing your vehicle every 15,000km or 6 months, whichever come first. Â
Â
Okay Energy Equipment Co., Ltd which is the first oxyhydrogen generator in China,we have researched and produced hho generator for 11 years.
Main products:Oxy-hydrogen Generator,HHO Generator,Carbon Cleaning System,
Catalytic Converter Cleaning Machine,HHO welding Machine, water welding Machine etc.
Agents/Distributors/Dealers are warmly welcomed!
Changsha Okay Energy Equipment Co.Ltd
Adress:No.27,Wenxuan Road,Yuelu District,Changsha City,China
Tel:Â Â Â Â Â 0086-731-83979221
Web:Â Â Â www.okayenergy.com
Â
CCS1500 for engines processing time  | ||
Gas output (L/H) |
Engine capacity        (L) |
Time (min/time) |
600 | 1.0-3.0 | 20 |
800 | 3.0-5.0 | 20 |
1000 | 5.0-6.0 | 20 |
1500 | 6.0-7.0 | 30 |
1500 | 7.0-8.0 | 30 |
1500 | 8.0-12.0 | 40 |
1500 | >Â 12.0 | 60 |
PS: It is just a suggestion for engine cleaning time, please according to the actual situation to determine the specific cleaning time |
Sand Casting is used to produce a wide variety of metal components with complex geometries. These parts can vary greatly in size and weight, ranging from a couple ounces to several tons. Some smaller sand cast parts include components as gears, pulleys, crankshafts, connecting rods, and propellers. Larger applications include housings for large equipment and heavy machine bases. Sand casting is also common in producing automobile components, such as engine blocks, engine manifolds, cylinder heads, and transmission cases.
Sand casting, the most widely used casting process, utilizes expendable sand molds to form complex metal parts that can be made of nearly any alloy. Because the sand mold must be destroyed in order to remove the part, called the casting, sand casting typically has a low production rate. The sand casting process involves the use of a furnace, metal, pattern, and sand mold. The metal is melted in the furnace and then ladled and poured into the cavity of the sand mold, which is formed by the pattern. The sand mold separates along a parting line and the solidified casting can be removed. The steps in this process are described in greater detail in the next section. In sand casting, the primary piece of equipment is the mold, which contains several components. The mold is divided into two halves - the cope (upper half) and the drag (bottom half), which meet along a parting line. Both mold halves are contained inside a box, called a flask, which itself is divided along this parting line. The mold cavity is formed by packing sand around the pattern in each half of the flask. The sand can be packed by hand, but machines that use pressure or impact ensure even packing of the sand and require far less time, thus increasing the production rate. After the sand has been packed and the pattern is removed, a cavity will remain that forms the external shape of the casting. Some internal surfaces of the casting may be formed by cores.
Sand casting is able to use of almost any alloy. An advantage of sand casting is the ability to cast materials with high melting temperatures, including steel, nickel, and titanium. The four most common materials that are used in sand casting are shown below, along with their melting temperatures
Materials Melting temperature
Aluminum alloys 1220 °F (660 °C)
Brass alloys 1980 °F (1082 °C)
Cast iron 1990-2300 °F (1088-1260 °C)
Cast steel 2500 °F (1371 °C)
The material cost for sand casting includes the cost of the metal, melting the metal, the mold sand, and the core sand. The cost of the metal is determined by the weight of the part, calculated from part volume and material density, as well the unit price of the material. The melting cost will also be greater for a larger part weight and is influenced by the material, as some materials are more costly to melt. However, the melting cost in typically insignificant compared to the metal cost. The amount of mold sand that is used, and hence the cost, is also proportional to the weight of the part. Lastly, the cost of the core sand is determined by the quantity and size of the cores used to cast the part.
Sand casting process advantages
Can produce very large parts
Can form complex shapes
Many material options
Low tooling and equipment cost
Scrap can be recycled
Short lead time possible
Applications:
Construction Machine Parts,Scaffolding Parts,Engine blocks and manifolds, machine bases, gears, pulleys, agriculture parts,Marine Parts,medical parts,hardware, automobile parts,ect.
Sand Casting
Sand Casting,Aluminum Sand Casting,Stainless Steel Sand Casting,Sand Precision Casting
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com