Cutting Saw for Furniture Making Precision Sliding Table Panel Saw

The angle of MJ6128Y series saw blade can be adjusted at 90 degrees -45 degrees (MJ6128 series for the angle of saw blade is not adjustable). The motor power is 5.5kW, made of pure copper wire. Double layer Chrome Plated Round Bar pushing table, the precision error reaches 0.2 millimeters. It adopts aluminum shell motor and NACHI bearing imported from Japan. It has little noise. The relay adopts Delixi brand, extend the service life of the machine.

Detail display


Accessory display



Whole machine display


Modern production workshop



 

1. Reasons for steering failure
â‘  The steering knuckle arm is deformed. â‘¡The steering knuckle thrust bearing is out of oil or damaged. â‘¢The gap between the steering knuckle king pin and the bushing is too small or lack of oil.
④The front axle or frame deformation causes the front wheel alignment to be inaccurate. ⑤ Insufficient tire pressure. ⑥ The steering gear bearing assembly is too tight. ⑦The meshing gap of the transmission pair is too small. ⑧ The horizontal and straight tie rod ball Pins are assembled too tightly or the joints lack oil. ⑨ The steering shaft or main pipe is bent, rubbed against each other or jammed. ⑩Improper lubrication of steering gear and improper toe adjustment.
2. Fault diagnosis and troubleshooting
â‘ Support the front axle and turn the steering wheel. If you feel the steering is flexible, the fault lies in the front axle and wheels. Because after supporting the front axle, the contact resistance between the wheels and the road when turning the steering wheel no longer exists. At this time, you should carefully check whether the front wheel air pressure is too low, whether the front leaf spring is good, and whether the frame is deformed.
â‘¡Support the front axle and turn the steering wheel. If you feel the steering is heavy, it means that the fault lies in the steering gear or steering transmission mechanism. At this time, the steering arm can be removed, and then the steering wheel can be turned. If it feels heavy, it means that it is an internal failure of the steering gear. Repair or replace damaged parts as needed.
â‘¢After removing the steering arm, turn the steering wheel. If you feel light and flexible, it means that the steering gear is not malfunctioning. After checking the above methods, if the tires, front leaf springs, frame, and steering gear are all correct, it can be basically confirmed.



SEM 50F, 650 Steering Machine
Liugong loaders ZL50CN, 855N, 856 Steering Machine,
SDLG 956L 952H 953 Carbon Fiber Steering Machine,
XCMG Steering Machine LW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 Hydraulic System
DEGONG loader Steering Machine
Foton Lovol Loader Steering Machine
Lonking 855N loader Steering Machine
XGMA 932 936 956 Loader Steering Machine
Changlin Loader Steering Machine
Shantui SL50W Custom Steering Machine
And we have more.

Steering Machine

Steering Machine,Steering Machine Of Xgma,Wheel Loader Steering Machine,Custom Steering Machine

Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com