Working Principle |
High accuracy auto feeding, auto straightening, auto cutting, auto bending |
 Model
|
HH-A130 |
Application Materials |
Flat  aluminum,edge aluminum,rectangle/triangle aluminum,super aluminum |
 Slot Degree
|
45-135 Degree(no limit for flat materials) |
Bending radius |
≥5mm |
Material Width |
≤130mm |
 Material Thickness
|
0.3-1.2mm   |
Total Power |
1000W |
 File format
|
dxf, ai,plt |
 Machine size
|
1400*1350*700mm |
Weight |
200KG |
voltage |
220V |
 Air pressure
|
0.3-0.8Mpa |
Working Principle |
High accuracy auto feeding, auto straightening, auto cutting, auto bending |
 Model
|
HH-A130 |
Application Materials |
Flat  aluminum,edge aluminum,rectangle/triangle aluminum,super aluminum |
 Slot Degree
|
45-135 Degree(no limit for flat materials) |
Bending radius |
≥5mm |
Material Width |
≤130mm |
 Material Thickness
|
0.3-1.2mm   |
Total Power |
1000W |
 File format
|
dxf, ai,plt |
 Machine size
|
1400*1350*700mm |
Weight |
200KG |
voltage |
220V |
 Air pressure
|
0.3-0.8Mpa |
The Hydraulic Copper Metal Baler is used for cold press metal scraps within 6-8mm in thickness under most circumstance. The processable material includes scrap steel, waste containers and disintegrated vehicle shell etc. After cold pressing into block, it is convenient for storage and transportation or putting into furnace. Hydraulic Metal Baler working principle: The metal scraps and other materials are placed in the workbin. The hydraulic cylinder works to suppress the pressure. The baled material is compressed and formed into various metal blocks.
Copper Shavings Baler, Copper Turnings Baler, Waste Copper Baler, Copper Wire Baler, Copper Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com