Od-Mounted Portable Pneumatic Split Frame Pipe Cutting and Beveling Tool for 2"-84" (60.3-2133.6mm)

August 23, 2025

Model NO.: SFM Series
Driven Type: Pneumatic
Torch Type: Cold
Feed Method: Star Wheel System, Fixed 0.0031" (0.08mm) Per Trip
Cutter Trip: 18m/Min(60FT/Min)
Finish: Anodizing, Sand Blasting
Accessories(Optional): Ring Sets; Sfm Tool Slides; O.D Tracking Slide
Industry: Power Plant; Petrochemical; Bolier Shop
Trademark: BHY
Transport Package: Metal Case/Wooden Case
Specification: SFM Series
Origin: Suzhou, Jiangsu, China
HS Code: 84619090
BHY Reliable On-site Machining Solutions
Website: www.bohyarglobal.com

Pipe Cutting & Beveling Machines

Od-Mounted Portable Pneumatic Split Frame Pipe Cutting and Beveling Tool for 2
★ Introduction:
SFM series are portable processing equipment for cutting, beveling and end prefabrication of various pipes, with which cutting and beveling can be conducted at the same time. The SFM Series manufactured by BHY cuts and bevels the pipe end or middle of pipe by clamping external wall, with processing diameter up to 2100 mm and maximum wall thickness of 100 mm. With an R&D history of nearly one hundred years, the product can process pipes or casings accurately, continuously and vertically.

★ Industry application:
It is widely used in long-distance transport pipeline, power plant, nuclear power, petroleum, chemical engineering, natural gas, boiler shop, pharmacy, pipe prefabrication plant, pipeline installation engineering, rush-repair work, etc.

★ Bevel Type
We have standard beveling tools of 5°,10°,20°,30°,37° and also can customize the tools.
Od-Mounted Portable Pneumatic Split Frame Pipe Cutting and Beveling Tool for 2

★ Technical Parameters
Model Processing
range (in)		 Max wall
thickness(mm)		 Weight
(kg)		 Drive mode
SFM0206 2"~6" 30 35 Pneumatic
Hydraulic
Electric
SFM0408 4"~8" 40 40
SFM0612 6"~12" 80 45
SFM0814 8"~14" 100 55
SFM1016 10"~16" 100 60
SFM1218 12"~18" 100 70
SFM1420 14"~20" 100 76 Electric
Hydraulic
SFM1824 18"~24" 100 123
SFM2026 20"~26" 100 130
SFM2430 24"~30" 100 142
SFM2632 26"~32" 100 150
SFM3036 30"~36" 100 159
SFM3642 36"~42" 100 179
SFM4248 42"~48" 100 198
SFM4860 48"~60" 100 642
SFM6072 60"~72" 100 730
SFM7284 72"~84" 100 820
* Processing range can be customized according to requirements
Drive mode Pneumatic Air requirements 1.7m3/min-6.2bars
(65ft3/min-90psi)
Hydraulic Hydraulic requirements 31l/min-104bars
(8gal/min-1500psi)
Electric Electric requirements 220V

Filter Press Accessories

1. Filtration Plate: Filter plates are the most important component of a Press Filter. They are used to support the filter cloths and contain the Filter Press Cake during the filtration process. Different types of filter plates are available, such as recessed chamber plates, membrane plates, and plate and frame plates.
2. Filter Cloths: Filter cloths are used to cover the filter plates and capture the solid particles during the filtration process. They are made of different materials such as polypropylene, polyester, and nylon, and are available in different pore sizes and thicknesses.
3. Press Filter Pump: Filter press pumps are used to supply the slurry to the filter press. They can be either centrifugal or positive displacement pumps, depending on the application.
4. Filter Press Feed Tanks: Feed tanks are used to store and supply the slurry to the filter press. They are available in different sizes and materials, such as polypropylene, stainless steel, and fiberglass.
5. Filter Press Cakes Discharge Systems: Cakes discharge systems are used to remove the filter cakes from the filter press. Different types of systems are available, such as automatic cake discharge systems, manual cake discharge systems, and plate and frame cake discharge systems.
6. Filter Press Controls: Filter press controls are used to monitor and control the filtration process. They can include pressure gauges, timers, and automatic control systems.
7. Filter Press Plates Shifters: Plate shifters are used to move the filter plates during the cake discharge process. They can be either manual or automatic, depending on the size and type of the filter press.
8. Filter Press Air Blow: Air blow systems are used to remove the residual liquid from the filter cake after the cake discharge process. They can be either manual or automatic, depending on the application.
filter press

Vertical Plate Pressure Filter,Diaphragm Filter Press,Filter Press Hydraulic Cylinder,Continuous Filter Press

Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com

Back to top