4kw Vacuum Pump for Food Packaging Machine with 3 Phase Single Stage (730H37)

Specification:
The advantages of Rexchip blowers: 
1. 100% oil free, Insulation class is F, Protection class is IP55.
2. Dual frequency 50HZ and 60HZ are available
3. Made of die cast aluminum ADC12.
4. Dual usage: compressor and vacuum (suction and blow).
5. Virtually maintenance free, with sealed long life bearings.
6. Smart design and low noise
7. ATEX explosion proof motor is available for all the blowers. We are the only manufacturer of blower which has the authorization to produce ATEX explosion proof motor. 
8. IE2 and IE3 motor are available for some blowers. 
9. Good quality and competitive prices. 
10. Quick delivery date. 

Application of Rexchip blowers/pumps:
Our blowers are widely used in the following applications.
1. Aquaculture (fish and prawn pong aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Pharmaceutical machinery
5. Garment machinery
6. Wood working machinery
7. Plastic machinery
8. Printing machinery
9. Textile machinery
10. Packaging machinery
11. Garment machinery
12. Paper processing.
13. Industrial cleaning machinery
14. Air knives
15. Dental suction equipment / dental vacuum pump

Our workshop: 

Our Exhibition: 



Our certification: (CE, ISO & CCC)





The instruction for Rexchip blowers:

The team of Rexchip has focused on this kind of blower for more than 15 years. We only produce side channel blowers, it's also called ring blower, regenerative blower, air blower, vacuum pump etc.. We also supply belt drive blowers and all the parts for this kind of blower. The range of the power for our blowers is from 0.12kw to 30kw. 

Each production procedure is operated in our own workshop, tooling making, die casting, stamping, high precision machining, assembling and automatic spraying, so we could control the quality, cost and delivery date better.





 
Specification:
The advantages of Rexchip blowers: 
1. 100% oil free, Insulation class is F, Protection class is IP55.
2. Dual frequency 50HZ and 60HZ are available
3. Made of die cast aluminum ADC12.
4. Dual usage: compressor and vacuum (suction and blow).
5. Virtually maintenance free, with sealed long life bearings.
6. Smart design and low noise
7. ATEX explosion proof motor is available for all the blowers. We are the only manufacturer of blower which has the authorization to produce ATEX explosion proof motor. 
8. IE2 and IE3 motor are available for some blowers. 
9. Good quality and competitive prices. 
10. Quick delivery date. 

Application of Rexchip blowers/pumps:
Our blowers are widely used in the following applications.
1. Aquaculture (fish and prawn pong aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Pharmaceutical machinery
5. Garment machinery
6. Wood working machinery
7. Plastic machinery
8. Printing machinery
9. Textile machinery
10. Packaging machinery
11. Garment machinery
12. Paper processing.
13. Industrial cleaning machinery
14. Air knives
15. Dental suction equipment / dental vacuum pump

Our workshop: 

Our Exhibition: 



Our certification: (CE, ISO & CCC)





The instruction for Rexchip blowers:

The team of Rexchip has focused on this kind of blower for more than 15 years. We only produce side channel blowers, it's also called ring blower, regenerative blower, air blower, vacuum pump etc.. We also supply belt drive blowers and all the parts for this kind of blower. The range of the power for our blowers is from 0.12kw to 30kw. 

Each production procedure is operated in our own workshop, tooling making, die casting, stamping, high precision machining, assembling and automatic spraying, so we could control the quality, cost and delivery date better.





 

 Stainless Steel Precision Casting or Stainless Steel Investment Casting, silica sol process. It is a casting process with little or no cutting. Cast Stainless Steel is an excellent process technology in the foundry industry. Its application is very extensive. Stainless steel cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.

 In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.   

 In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at  24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.

 In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.

 In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.

 In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part,we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace.During this process we use ERP production and management software to get the feedback information.

 In shell-knock out process,we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.

 In shot-blasting process,we have crawler-type and hanging shot-blasting machine,with steel shot 0.5-0.8,making the products smooth.Of course,if the customer wants it look much nicer,we also can carry out sand-blast treatment.

 In heat treatment process,we use electric furnace,and adopt double-temperature control in order to heat the products equally.As a result, the products will have great metallurgical structure.

 Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.

  In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.

  Products in stainless steel cast factory divide into Pump Valve Accessories Casts, food machinery casts, and architectural hardware casts.

  

Stainless Steel Precision Casting

Stainless Steel Precision Casting, Stainless Steel Investment Casting,Investment casting products,Cast Stainless Steel

Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com