Excess engine temperature check and treatment method for bulk feed carrier
When the summer arrives, the temperature of the vehicle's engine will be too high, but in most cases, many people will easily ignore it and feel that this is not a big problem. In fact, if the engine's heating phenomenon is not properly checked and dealt with, it may cause various engine failure problems. The following is a brief introduction of some methods and techniques for checking and handling the overheated engine of the feed truck.
1. Look at the status of the temperature indicator light. If it is found that the temperature warning lights in the car are continuously blinking, it means that the temperature of the starting system is already very high. The owner should immediately stop the car and carefully check the cooling system on the car. If no abnormalities are found during the inspection, the cooling water in the cooling system can be added after it is completed. However, if it is found that the system is faulty during inspection, it must be promptly sent to the nearest repair shop for repair.
2, touch the water pipe, feel the temperature difference between the upper and lower water pipes. If no problem is found during the inspection of the cooling system, you can use water to gently touch the upper and lower water pipes to feel the temperature of both. If the temperature difference between the two is too large, then there is a problem with the thermostat and it will not be able to cool down. At this time, you can buy replacement parts of the same specifications.
3, check the heat sink heat dissipation. Because the chassis of this type of feed carrier is exposed to the outside for a long period of time, the vehicle will run under a road with poor road conditions for a long time, and a thick layer of dirt will accumulate on the radiator, making the performance of the radiator. Was severely affected. Therefore, if you find that there is too much dust after the radiator is dirty, flush the radiator in time and let the radiator clean again.
The above is the inspection and treatment of abnormal engine fever in the summer of this vehicle, and it is hoped that it will be helpful for those owners who often need to use the vehicle.
A Semi-Gantry Crane is a Gantry Crane with only one side supporting leg, and the other side is supported on the horizontal structure such as workshop wall. The leg side is traveling on rail tracks laid on the ground, while the other side is traveling on the tracks on the supporting structure.
The main beam of a semi-gantry crane can be a double-girder or a single girder, and the hoisting mechanism can be an Wire Rope Electric Hoist or a hoist/winch on a trolley. The semi-gantry crane is usually used outdoors, also indoors at a large workshop for handling working pieces, bulk mateirals, machines, steel products, scraps, containers, etc.
Capacity: 1t - 500t or custom
Span: 6m - 32m or custom
Lift height: 6m - 32m or custom
Work duty: A4, A5, A6 6m - 32m or custom
Sling device: hook, grab, magnet, disc, spreader or special device for special industry
Packing: wooden case, rain cloth, reinforced bar, etc.
Features of Semi-Gantry Crane:
1. All steel plates are processed by pretreatment production line: Shot blasting – Painting – Paint Drying, Eliminate stress in steel plate, and increase Adhesion between paint and steel plate and anti-corrosion.
2. Adopt Germany Messer plasma CNC cutting machine to cut steel plate with high efficiency and accuracy (±1mm).
3. Rolling drum with seamless steel with pressure 1250t. Auto welding and heavy duty CNC lathe for processing.
4. Double gun gantry submerged arc welding for end beam processing.
5. Welding robot for main beam welding, MAG welding for inside seam welding, Ar+CO2 Mixed protective gas.
6. X-ray flaw detection, Ultrasonic flaw detection for welding seam.
7. High temperature quenching and quenching and tempering treatment for wheels to release internal stress.
8. Annealing furnace (1000mm*4000mm*4000mm) for annealing of trolley, rolling drum, balancing beam, wheel group and spreader.
9. Anti-sway system can be equipped according to customers' requirement.
Semi-Gantry Crane
Semi Gantry Crane,Semi-Gantry Crane,Semi-Gantry Crane Single Girder,Single Girder Semi Gantry Crane
Henan Weihua Heavy Machinery Co., Ltd. , https://www.hoistcrane.nl