High-tech Autoclave Aac Sand Lime Brick Block Making Machine

Autoclaved Aerated Concrete (AAC) Brick is a light weight, multi-cell new construction material; the features include lower density, heat insulation, possibility, fire and acoustical resistant properties. AAC is made from silicon material(silica sand, or recycled fly ash) and calcium material (lime, cement), mixing with foaming additive (aluminum powder),batching with, the reaction between aluminum and concrete causes microscopic hydrogen bubbles to from, expanding the concrete to about five times its original volume. It is made into the multi-cell silicate product by the processes of molding, pre-curing, cutting, evaporating and curing.

Advantages of the AAC brock application

1. Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors

2. Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters. AAC reduces Air conditioning cost by 30%.

3. Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

4. Floor Space Area

Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

5. Cost saving

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving. Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.

 Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

6. Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

7. Pest Resistant Termites hate AAC!

Being made of inorganic minerals, it does not promote growth of molds.

8. Water Barrier

Its structure does not allow for capillary action making it impervious to water. Its water barrier properties are further enhanced by adding silicone based additives.

 Strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements.

9. Energy Efficient

AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings (ITC centre, the highest rated Green Building has been built using AAC).AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m³ of product. Unlike brick manufacturing process which uses previous top layer agricultural soil, AAC uses Fly Ash (65% of its weight), thus provides the most constructive solution to the nation's fly ash utilization problem.


 

AAC block production line and its mainly supplied machine

The AAC block production line is equipped with dozen of equipment and machine, which is mainly consist of Horizontal cutter, vertical cutter, autociate, mixing and pouring machine, pouring ferry trolley etc. 

01. Bucket Elevator     02. Lump lime silo    03. lime power silo     04. Cement silo     05. Gypsum power silo

06 Belt conveyor          07. Ball mill                08. Slyrry storage tank                                  09. Bactching system

10. Mixing and pouring machine                   11. Pouring ferry trolley                                 12. mould

13. Grouping conveyance mechanism        14. Cutting machine                                     15. Rolling-over table

16. Side plate              17. Turnover conveyor device and tilting hoist                               18. Steam Generating system(boiler)

19. Autociave                20. Steam distribution system                                           21. production conveyor device and production hoist

.22. Clamping and conveying mechanism for finished product                         23. Conveying mechanism for wooden pallets

24 Roller conveyor for side panel 


 

Why choose Hongfa 

Guangxi Hongfa Heavy Machinery Co.,Ltd ,having three manufacturing factories and also an export company,specialized in Concrete Precast machinery.Whole production line equipment of Pallet free concrete /fly ash noiseless brick production line,concrete pipes, concrete blocks, paving bricks,concrete batching plants, AAC production line and EPS wall panel production line, we are the most widely machinery & equipment manufacturer and supplier in the block industry in China. 

 

Hongfa provides our clients with coordinated-process service of Designing, Manufacturing, Installing& Commissioning,and Programming for your factory layout and worker training,with more than 20 years experience in the block industry line, our machine have been sevice to more than 76 countries and regions such as russia, India, South Africa and so on. 

 

Hongfa group, there are two production bases (Guangxi production base and shandong production base), three production factories, two imported-exported companies, on provincial construction & building material machinery institute, one new construction materials company and have established sales companies in vietnam, India and indonesia.  Guangxi production base, location of 20 km colse to the Nanning city (largest city in western of China, also the Capital city of Guangxi), covers an area of 60000 m2, building erea of 23000 M2, there are more than 200 employee. Shandong production base, is located in Dazhuang Economic & Devoloping zone, Yian country, Shandong province, covers an area of 300000 M2, building area of 86000 M2, with more than 1000 employees.

Contact: Yumi Ruan
Guangxi Hongfa Heavy Machinery Co.,Ltd
Tel:0086-0771-5672282
Mob: +8615277118797

Melt-blown Non Woven Fabric

Made from special polypropylene resins using innovative techniques, melt-blown filter media is a highly efficient solution for high-performance filters. Increased density means greater capacity for containing dust and a longer lifespan for the product.

PP super-fine fiber filter material is a new type of filter material made of polypropylene special resin with the melt-blown non-woven technology.The fiber of the product,with three-dimensional net structure,decreases the filtering resistance and can contain more dust.The product is ideal to be used in initial,medium and high efficiency filter,self-air-cleaner,vacuum cleaner etc.due to its low resistance and high efficiency.The product can also be used for liquid filtration,oil stain disposal,water purification and other purposes.
Product Performance:
The product is from hydrocarbons with innocuity,insipidity,white and light character.
The fiber distributes uniformly,softly and compactly,having the trait of high intensity,low resistance and high efficiency.
Acid and alkali resistant,with high melting point(167-174°C)and stable performance.

Meltblown Nonwoven

Meltblown Nonwoven,Melt-Blown Polypropylene Fabric,Non Woven Fabric

Hebei Fangyu Trade Co., Ltd. , https://www.filtersmaterial.com