Tubeless Tire Repair Kit

• Model NO.: CC1354
• Trademark: Super Care
• Specification: Standard
• HS Code: 3506100090

• Material: PP, Metal, Rubber
• Transport Package: Standard Export Carton
• Origin: Ningbo, China

Products Detail

Why choose us?
Function and User Guide 
 1. The first step is to locate the offending foreign object in your tire.
  2. Remove the Object
  3. Put 2-3 drops of the rubber cement on the tip of the reamer and insert the reamer into the puncture. Work the reamer in and   out while twisting to clean and prep the puncture and apply the cement. This process will also enlarge the hole to that the           plug will fit through; because of this the first couple of insertions can be difficult. Repeat this process 2-3 times to make sure t     the puncture is clean and that there is enough cement in the wound. 
4. Take each end of the repair string(about 70mm long), this is the plug, and roll the center of the string into the needle eye.       Apply 2-3 drops of rubber cement to the end of the needle and 
Push the needle and repair string into the puncture (this can be tricky with smaller punctures) until only about a quarter-inch of the strip is sticking out of the tire's surface.
 5. Make a 1/4 turn with the  handle and pull the needle probe out of the tire. The patch should remain in the tire when you remove the probe.Trim the repair strip that is sticking out of the tire down to about 1/8 of an inch.
6.Use an air compressor to replace any air that may have leaked out of the tire. Your tire should be re-inflated and ready to get back onto the road.

Notice
Please note that this repair kit should not be used to fix tyres with punctures bigger than 1/4'' and should only be used as temporary safely. Then you can repair your tire permanently.

Do not try to repair any sidewall puncture.

Contact us
Ningbo Super Clean Co.,Ltd.
ADD: No.1, HouCang Industry Zone,
        West Section Yinxian Road, Ningbo China(315153)
TEL:0086-574-89020080,89020081
FAX:0086-574-88255300
Mobile:0086-13858225192
www.nbsuperclean.com
 
 









 

Food hose, appearance more common blue and red outer plastic, white inner tube.

Working pressure:10−30 bar.

Hiteck set up advanced laboratory, is committed continuously improve production technology,the development of new formula, improve production efficiency and product quality. For the food hose, we make the best to ensure the quality to meet FDA and popular in many countries, we know your market demand very well, we can provide products suitable for your market, we can help you to make money.

Application

FDA approved food hose designed for the delivery of fatty foods such as milk, edible oil, daily products etc.    
Tube
White, smooth, NBR food quality rubber.
Reinforcement
High strength synthetic cord.
Cover

Smooth(wrapped finish), synthetic rubber, weathering resistant.

Payment Terms:

L/C, D/P, T/T, Western Union, MoneyGram, Paypal

Delivery time:

in 30 days after your payment.

Package:

we could design package according to customer's desire.

FAQ

Can you produce the hose with my own brand?

Yes, we have been offering OEM service for 10 years.

 

Could we pay a visit to your factory?

Yes, you are always welcome to visit our factory.

 

Can we get the goods without your company name to export?

Yes, we can. We are allowed to use your designated agent's name if you have one.

 

Can you send us a sample to test quality before ordering?

Yes, we can provide sample by free but the freight and other charges is payed by the customers.

 

Can you help us do the custom clearance?

Yes, we can. We can help you find a professional custom clearance company to do it.

 

Can you produce goods with special specification?

First of all, we need to know the specification in details, and then we need to check with our technology department.

Food Grade Hose

Food Grade Rubber Hose,Uhmwpe Food Hose,Uhmwpe Food Suction Hose,Flexible Hose Food Grade

Hebei Orient Rubber & Plastic Co., Ltd. , https://www.hiteckhose.com