Before using the CNC machine tool, you should carefully read the machine tool instruction manual and other relevant information in order to operate the machine correctly, and pay attention to the following points:
(1) The machine tool operation and maintenance personnel must be professionals or technically trained personnel who have mastered the relevant machine tool professional knowledge, and must operate the machine tool according to the safety operation regulations and safety operation regulations;
(2) Non-professionals are not allowed to open the electric cabinet door. Before opening the electric cabinet door, it must be confirmed that the machine's main power switch has been turned off. Only professional maintenance personnel are allowed to open the electric cabinet door for power overhaul;
(3) Except for some parameters that can be used by the user and can be modified, other system parameters, spindle parameters, servo parameters, etc., cannot be modified by the user, otherwise it will bring damage to the operator such as equipment, workpieces, and people;
(4) After the parameters are modified, when the first processing is performed, the machine tool shall be tested with the machine lock and single block in the case of not loading the tools and workpieces. After confirming that the machine tool is normal, the machine tool will be used;
(5) The PLC program of the machine tool is designed by the machine tool builder according to the needs of the machine tool and does not need to be modified. Incorrect modification, operation of the machine may cause damage to the machine, or even injure the operator;
(6) It is recommended that the machine tool run continuously for a maximum of 24 hours. If the continuous operation time is too long, it will affect the life of the electrical system and some mechanical devices, which will affect the accuracy of the machine tool;
(7) All connectors, joints, etc. of the machine tool are not allowed to be charged and inserted. Otherwise, serious consequences will occur.
Picking Machine
We R&D the dark spots picking machine independently, fully automatic instead of manual work, it's easy to operate and efficient. Automatic feeding, automatic picking, strong and clean design. Hightech image identification, unique technology, dark spots picking efficiently, also work with feather and clusters down. Automatic process, undamaged down, assured quality, enclosed space, no pollution. Different packing ways for white and dark down, automatic packing, dark down can be recycled and reused. Fully automatic operation, work for 24hours a day, produce 8-10kg by hour with 2 cameras, reduce Dark spots rate below 1/‰. Customization for different requirements, warranty for one year. Return investment within 6 months, improve economic benefit.
Dark Spots Picking Machine, Black Spots Sorting Machine, Picking Grey Down Machine, Dark Spots Sorting Machine, Automatic Dark Spots Picking Machine
Changshu Bealead Automatic Machine CO., LTD. , https://www.bealeadglobal.com