Free Samples Fiberglass Fix Bandage Leak Oil Gas Water Pipe Repair Tape /Kits
Ansen Pipe Repair Bandage is a fast-curing tape made from flexible fiberglass mesh impregnated with water-activated polyurethane resin. It is designed for quick repairs of oil, gas, and water pipelines. This environmentally friendly material adheres to various surfaces such as metal, concrete, plastic, wood, and more. Ideal for cracks, fractures, corrosion, and leaks in pipes, including complex shapes like tees and elbows. It’s easy to use and can be back in service within 30 minutes.
Product Features
1. Resists extreme temperatures
2. Easy to apply, no mixing or cleanup required
3. Resistant to water, acid, salts, and organic materials
4. Can be applied underwater or on wet surfaces
5. Provides quick, long-lasting protection and is ready for immediate use
6. Non-toxic and safe for potable water lines
Specifications
| Name | Model | Size | Packing |
| Pipe Repair Bandage / Fiber Fix Tape | PR002 | 5 cm x 3.6 m (2" x 12") | 10 rolls x 10 boxes / ctn |
| PR003 | 7.5 cm x 3.6 m (3" x 12") | ||
| PR004 | 10 cm x 3.6 m (4" x 12") | ||
| PR005 | 12.5 cm x 3.6 m (5" x 12") | ||
| PR006 | 15 cm x 3.6 m (6" x 12") |
Technical Data
| Tensile Strength | Pressure Resistance | Shore D Hardness | Max. Service Temperature | |
| High Strength Bandage | 35 Mpa | 19 Mpa | 82 | 150°C |
| Ordinary Bandage | 28 Mpa | 15 Mpa | 65 | 120°C |
Application Instructions
1. Turn off the pipe and wear disposable gloves.
2. Soak the bandage in water for about five seconds.
3. Apply the tape around the damaged area, extending 50mm on either side of the leak, with a minimum thickness of 10mm for best results.
4. Press and mold the layers together by hand for a tight bond.
5. Allow at least 30 minutes for the tape to harden completely.
Factory & Exhibition
About Us:
Ansen Medical specializes in orthopedic fiberglass casting tapes, splints, pipe leak repair bandages, and cable protection armor. We also offer casting padding, electric plaster saws, elastic bandages, tubular bandages, and latex gloves. Our equipment is imported from Germany, and we maintain full automation and microcomputer quality control throughout our production lines. We are CE and FDA certified.
Sales: Milly Hu
Tel: +86-29-85256623
Mob: +86-15686052556
Seamless steel pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.
Hot rolled seamless steel pipe deformation process can be summarized as three stages: extension, perforation and finishing. Hot rolled seamless steel pipes is relative to the cold-rolled, cold rolling is below the recrystallization temperature of the rolling and hot rolled is carried out at above the recrystallization temperature of the rolling. Hot rolled seamless steel pipe can damage the refinement of the crystal grains of the steel, cast microstructure of the steel ingot and eliminate the defects of the microstructure so that the the steel organization compacting, improves the mechanical properties. This improvement is reflected in the rolling direction so that the steel is no longer at a certain extent isotropic; pouring the formation of bubbles, cracks and osteoporosis, under high pressure and temperature can also be welded together.
Hot Rolled Steel Pipes (Seamless Tube) in different size, specifications, grades & thickness as per the client's requirements. The range offered by tubes is available as per the international & national standard and can be available from us at affordable prices. These pipes are used in various application industry like shipbuilding, power plants, oil and gas, automotive, sugar mills and distilleries, cement and construction industries etc.
Steel Pipe,Seamless Pipe,Welded Pipe,Square Pipe,Round Pipe
Tianjin YF Steel Co., Ltd , https://www.youfametal.com