Analytical constant temperature and humidity testing machine simple troubleshooting method
The constant humidity and humidity testing machine belongs to the detection product performance, thereby improving the product testing equipment. Any problem may lead to the accuracy of the test results. Failure is also inevitable. In fact, equipment failure is not necessarily due to the quality of the equipment itself. Many times it is caused by equipment users who do not understand the product, or operate improperly, or because of changes in the use of personnel, the transfer of incomplete or other reasons. If there is a complex fault such as a cooling system or a control system, contact the factory immediately. In this chapter, Xiaobian explains simple troubleshooting methods for general practitioners.
(a) lighting failure. Phenomenon: The light is not on a) Check if the light is damaged. If damaged, replace it;
b) Check if the ballast is damaged. If it is damaged, replace it.
(B) Door heating wire failure, phenomenon: glass observation window in the low temperature test, observation window glass does not heat.
a) Remove the door heating wire from the terminal and measure it with a multimeter. If damaged, replace it;
b) Check the output voltage of the miniature power transformer. If not, replace it.
(3) The fan's long axis motor has failed. Symptom: The fan motor does not turn a) Check the motor. If damaged, replace it;
b) Check the starting capacitor. If damaged, replace it.
(d) Cooling fan failure. Phenomenon: The cooling fan does not turn a) Check whether the power supply voltage is normal;
b) The fan is damaged. Please replace it with the help of the manufacturer.
Reminder: The user of the equipment should fully understand the structure of the equipment before using the constant temperature and humidity testing machine, carefully read the operating instructions, and use it according to the instruction manual during operation. In case of unclear areas or problems that cannot be eliminated, contact the manufacturer of the equipment in a timely manner. Must not be disassembled without permission.
CNC Oscillating Knife Cutting Machine
Concepts:
Oscillating Knife: Oscillating Knife cutting has the advantages of small cutting force, low cutting heat, high surface quality of the workpiece, easy chip handling, improved tool durability, stable processing and high production efficiency.CNC VISION SYSTEM: CCD Vision Cutting system contains two operating modes: direct cutting mode and photo processing mode. Therefore, the processing route manufacturing steps
Differentiate: Direct cutting does not need to draw a photo point, and the tool path file for drawing a photo point can be processed through the buttons on the interface.
INDUSTRIES:
Sign and Graphics, Digital Printing, Packaging, Automotive, Recreational boat, Exhibits, and Fixtures, Sign Making, Gasket Materials, Arts and Crafts, etc.
Carpet, Felt, Foam, Closed Cell Foam, Fiberglass Insulation, Composites, Gasket Materials, Rubber, Fabric, Honeycomb Cardboard, Single-ply Cloth/Fabric, Corrugated Cardboard/Paperboard, Vinyl Veneers, Snowboard, Corrugated Plastic, Leather Goods, wood veneer for inlay/marquetry artwork, Carbon fiber pre-preg laminates for aerospace, military, and automotive components i.e.
Why choose Oscillating Knife Cutting Machine
-
Advanced Weihong 53C+TROCEN control system, easy and precise operation;
- The heavy duty thickened bed is welded by square pipe, side hanging
- structure, heavy column, 150*200mm gantry;
- Patent type 1:8 reducer;
- Has the advantages of small cutting force, low cutting heat, high surface quality of the workpiece, easy chip handling, improved tool durability, stable processing and high production efficiency.
- The high precision CNC Oscillating Knife Cutter can induce draft separately and easily cut small pieces.
Main features:
- Working area: Could be customized(1300*2500mm; 1500*3000mm; 2000*3000mm etc.);
- Voltage: 220-420v, 3phase, 50-60hz;
- Spindle:3.5kw air cooling spindle and Oscillating knife+CCD camera;
- X Axis & Y Axis System: Germany ASK/PMT/GC-HIWIN 20 linear guide+Flange slider+Precision 1.25module helical rack+Patent type reducer structure 1:8
- Table: Vacuum & T-slot table;
- Precision machined aluminum parts, using aviation aluminum T6061/6063 material, CNC processing center precision manufacturing.
Oscillating Knife Cutter With CCD
Oscillating Knife Cutter With Ccd,Oscillating Knife Cutter,Cnc Router With Oscillating Knife,Oscillating Knife Atc Contour Cutter
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de