Ore weight

The determination of the weight of the ore sample required for the test depends mainly on the following factors: the type and nature of the ore, the type of test, the scale and depth, the complexity of the ore dressing method and process, the specifications and capabilities of the test equipment, and the test run time. The weight of the ore sample shall be determined by the test research unit. The following is the general requirement for the weight of the ore sample. (1) Optional test and laboratory small process test The general requirements for the weight of the sample, see the table below. General requirements for the weight of the sample in the optional test and laboratory small process test

Test type Ore type Mineral processing method Mineral sample weight, kg
Optional test Magnetic iron ore magnetic separation 100-200
Hematite, siderite iron, non-ferrous metal ores, apatite, pyrite, chrome ore Flotation, strong magnetic separation, roasting magnetic separation, reselection 200-300
Multi-metal ore, manganese ore, silicon calcium phosphate rock, potassium ore, boron ore Flotation and maglev joint selection 300~500
Re-election 300-100
Test small process test Magnetite magnetic separation 200-400
Hematite ore, siderite ore, non-ferrous metal ore, apatite, pyrite ore, chrome ore Flotation, strong magnetic separation, roasting magnetic separation 500-1000
Re-election 2000-3000
Polymetallic ore, manganese ore, silicic calcium phosphate, potassium ore, boron ore Flotation and maglev joint selection 1000-1500
Re-election, floating weight joint selection 2500-4000
Refractory oxidized ore mixed ore Joint selection of smelting and smelting 4000 or more
(2) The laboratory expands the weight of the continuous test ore sample, usually 5000-10000kg. (3) The weight of the semi-industrial test and industrial test ore sample shall be determined according to the purpose of the test, the content of the test, the capability of the test equipment and the test time (the relevant test contents, test equipment capacity, test time, etc.) (4) The weight of the test ore sample containing precious metals and rare elements shall be calculated according to the content of the components and the required amount of the selected equipment in the test. (5) The use of new equipment, new processes, new technologies, new pharmaceutical agents and some For special tests, the amount of ore and sample weight to be added shall be requested by the experimental research unit.

BOTUO High-Pressure Technology combined to form complete High-Pressure Systems
Individual systems for diverse high-pressure applications: Industrial cleaning, pressure test and mining, as well as water hydraulics.

For special areas of application, individual high-pressure systems are required which BOTUOLINI factory can provide, extending from the first project idea through to the turnkey installation, with 100 percent of the manufacturing in-house. To match the required application, our customers can chose between different drives, force-transfer components, PLC controls, measuring systems, data transfers, remote controls, pneumatic and electrical valve controls, chassis and acoustic insulation equipment. botuo high-pressure systems are used commonly in industrial cleaning, pressure testing, mining as well as in water hydraulics. In addition, botuo frequently provides special systems for special applications. Examples are the use of special fluids, or the fulfillment of explosion-protection requirements.

Complete High-Pressure Systems

complete High-Pressure Systems,cleaning system, ultrahigh pressure cleaning system

ZHEJIANG BOTUOLINI MECHANICAL CO.,LTD , http://www.botuopump.com