The acceptance of vault doors requires special attention

Now with improved quality of life for everyone, for everyone's sense of security is also getting higher and higher, and now some of the protective equipment selling is getting better, while the previous protective equipment also began gradually be eliminated, treasury The door was used as a protection facility that was excavated in the past two years. It was previously used in banks, museums, and other units. Nowadays, many enterprises and villa areas have begun to use this product. Its protective capabilities are higher than ordinary safes. To be much higher, not only can fire and security, but also play a role as a shelter when the key.

In spite of this, after all, it was a protective facility that was unearthed in the last two years. The level of understanding of most consumers is not enough. Therefore, whether we buy or accept, we do not have much experience. Regarding the purchase of vault doors, We have done a lot of analysis for you before. Today we don't give a detailed introduction. Today, we mainly talk to you about several issues that should be paid attention to in the acceptance of vault doors.

Appearance: Most consumers may think that the vault door is not much damage to the appearance of steel products. In fact, due to the weight of the vault door, the appearance of the vault doors is still relatively vulnerable to damage during the handling and transportation process, especially the carbon steel vault doors. A slight difference will cause the paint to be knocked out, so when it comes to acceptance, we must first check the appearance of the product.

Whether the accessories are complete: As the vault doors are all optional, most of the accessories are selected by the consumers themselves, and most of the vault door parts are not directly sold online and can only be picked up at the factory. Therefore, if there are missing parts, then we are not only damaging the money, but also a lot of time and energy, so we need to confirm the acceptance.

All aspects of parameters meet the grading standards: For example, if we buy the B-class, then whether its plate thickness is 10 mm, the internal is not a good waterproof measures, etc., which we need to confirm in detail, not to be considered too Trouble and lose your own interests.

Whether there is a test report: an excellent vault door usually has a test report, a test report, then it proves that there is no problem with the quality of this product, on the contrary, it means that this product is either not tested, or Is not qualified.

Flexibility: We need to check the flexibility when opening the lock and the door leaf. If the opening is strenuous, then the door leaf may be damaged in the process of transportation. At this time we need to pay attention, and we need to give feedback to the technicians. Please ask them Troubleshoot, lock is the same reason.

If there is no problem with these items, then this vault door is still very good, we can also rest assured acceptance, but Xiao Bian here to remind everyone that things are dead, people are alive, for this set of acceptance Theory should be applied flexibly instead of using it.