Road sweepers , like people, are also very much in need of love. What can we do to make our Love Sweeper better with us? Love road sweepers must be regularly maintained, just as people also need regular medical examinations. The periodic examination of the human body can make early detection of the disease in our body and make us healthier. Love the road sweeper is the same reason, to develop good driving habits, regular love to sweep the car to do a "health check."
However, you need to know that this refueling is a seemingly simple matter, and it also contains a lot of great knowledge. Is the higher the better the gasoline labeling? Now the gasoline sold on the market has 90#, 93#, 95#, 97#, etc., the number of gasoline, try to mark the reference index of gasoline antiknock ability. It has nothing to do with fuel economy and cleanliness. It is not the higher the number, the better. Look for the recommended fuel number inside the fuel tank cap.
When the road sweeper truck is refueling, it is not possible to wait until the fuel burns out, because the fuel pump is placed on the inside of the fuel tank and is cooled by gasoline. If the fuel is running out, no fuel will be added and the fuel pump will be pumped. Heat is not damaged in time. When the fuel gauge pointer approaches or reaches the red line, you can consider refueling.
Many pilots think that the gliding to open the gap is the most fuel-efficient, but there is a great safety risk in the neutral taxiing. When the shift lever is in the man position, the driving wheel will lose its driving force. There is a loss of connection between the engine and the drive wheels, and the sweeper taxis forward on its own inertia. If there is an emergency and braking is needed at this time, but the braking force provided by the braking system is very limited at this time, the impact on the braking effect is not small. Therefore, nine points of maintenance and one minute of maintenance are the best maintenance methods for car use.
The fluorinated mica crystals have very good high temperature resistance, corrosion resistance and light transmission properties, and can work for a long time at a high temperature of 1100°C.
No reaction occurs with strong acids and alkalis; complete light transmittance (pure and transparent). The natural mica plates traditionally used in the observation window of high-pressure boiler water level gauge are all brown, and the light transmittance is not good, and the temperature resistance is in the range of 200-700°C, especially the corrosion resistance is poor. The boiler steam drum water in thermal power plants contains alkali. After reacting with natural mica and alkali, it is washed with hot air and hot water, and it is prone to fluffing, scaling, and being broken. In the short term (about 1-2 months), the water level is not clearly understood. After being broken, it can easily cause leakage. The fluorite mica does not react with the acid-base solution, and does not react with water in the hydration reaction, so that it does not form a layer, does not scale, and does not break. In the long-term (2 to 3 years) scouring of high-temperature and high-pressure water (including acid and alkali), the original clarity and transparency can still be maintained. In China, it has been widely applied to the observation window of steam boiler water level gauge in high-pressure boilers of thermal power plants. It has also been selected by Japanese BBK company and NDK (Colin) company for the observation window of high pressure boiler drum level gauge.
High Temperature Mica Gasket,High Temperature Gaskets,High Temperature Gasket Material,High Temperature Insulation Materials
Changchun City Taiyuan FluorphlogopiteCo. Ltd. , https://www.micaslice.com