Chengde quickly promotes the transformation of coal-fired industrial boilers in the city

Chengde City has recently issued the "Changde Municipal Coal-fired Industrial Boiler Renovation Work Plan" to clarify the boiler transformation path, determine the focus of boiler reform, implementation of business model innovation, and strengthen the promotion of technology applications, etc., to accelerate the transformation of the city's coal-fired industrial boilers, and promote efficient boiler industry Change.

According to the requirements of the document, Chengde City will accelerate the elimination of backward boilers. Before the end of September 2015, all steam coal industrial boilers with a capacity of 35 tons or less were eliminated in addition to the necessary reserved areas in Shuangqiao District, Shuangye District and the high-tech zone. Before the end of 2015, all coal-fired industrial boilers with a capacity of 10 tons or less in the built-up areas of the counties, high-tech zones, township governments, and main transportation lines were eliminated. By the end of 2017, all coal-fired industrial boilers below 10 tons of coal were eliminated from the urban-rural fringe and other suburban counties.

Clear boiler rebuilding path. Implementing "a large generation of small" for development zones, industrial parks, industrial clusters, and industrial clusters with relatively concentrated heat loads, and building centralized heating through the construction of micro-coal atomization and other highly efficient pulverized coal boilers or the development of combined heat and power generation Center, to replace the disperse small coal-fired industrial boilers. For small-scale coal-fired industrial boilers that have been reserved in urban areas and scattered in rural areas, energy-saving technologies such as combustion optimization, automatic control, and low-temperature flue gas waste heat recovery have been implemented to achieve quality improvement, energy efficiency, and emission reduction. For the decentralized coal-fired industrial boilers that can not be covered temporarily by the central heat supply network and have useful thermal rigidity requirements, the coal-to-gas conversion and coal-to-electricity conversion will be carried out according to the specific conditions of district heating, natural gas, and new energy in the county where the company is located. Coal will change biomass, coal to new energy sources, and promote clean energy alternatives.

Determine the focus of boiler renovation. In cities such as Shuangqiao District, Chengde High-tech Zone and Shuangye District, they will actively strive to increase the natural gas distribution target and give priority to the promotion of natural gas, methanol and other clean energy transformation coal-fired industrial boilers; in Shuangdi District, Gaoxin District, Kuancheng, The industrial parks in Xinglong County and other places encourage the construction of cogeneration projects and micro-coal atomization and other high-efficiency pulverized coal boilers, and phase out the decentralized coal-fired industrial boilers; encourage rural areas in Fengning, Weichang, Longhua, and Pingquan counties. The use of waste straws, fruit sticks, etc. to promote small-scale coal-fired industrial boilers to improve biomass; promote the use of clean coal in the Kuancheng, Xinglong, Yingzi and other counties, after conditions mature, in other counties to further promote.

Implement business model innovation. Encourage and introduce service companies with advanced technology, high energy efficiency, environmentally friendly emission standards, safe and stable operation, and participation in the transformation and replacement of coal-fired industrial boilers. We will focus on the introduction of powerful specialized large-scale enterprise groups, and adopt service outsourcing modes such as construction-ownership-business model, contract energy management, construction-operation-transfer model, and construction-transfer model, with high construction efficiency and emissions. Large-scale, high-efficiency pulverized coal boilers that meet gas standards.

Raise the level of pollution control. With strict project access, new coal-fired industrial boilers are forbidden in city-wide urban built-up areas, and coal-fired boilers with 10 steam tons per hour and below are prohibited in other regions. Installation and use of coal-fired boilers of 20 tons/hour or above should be equipped with high-efficiency desulfurization and high-efficiency dust removal facilities. To improve the use of coal-fired boilers for desulphurization and dust removal, coal-fired boilers with a capacity of more than 10 tons/hour must carry out highly efficient desulfurization and dust removal of flue gas, actively carry out demonstration demonstrations of low-nitrogen combustion technologies, and achieve full compliance with emission standards. Coal-fired boilers with a capacity of 20 tons/hour or above should be equipped with on-line monitoring devices and be networked with local environmental protection agencies.

Strengthen technology promotion and application. In the metallurgical, chemical, building materials and other industries, coal-fired industrial boilers, to promote the demonstration of new high-efficiency pulverized coal boiler system technology and coal smoke gas purification and heat recovery integration technology. In the food, paper, printing and dyeing industries such as small and medium-sized industrial boilers, popularization of decoupled combustion technology. We will expand the scale of clean energy, increase the supply of clean energy such as natural gas and liquefied petroleum gas, and integrate Chengde City into the national natural gas supply network. The promotion of clean coal shall be vigorously promoted. A clean coal distribution center shall be established in each county, Shuangyu district and Yingzi district, and the full coverage of clean coal distribution shall be achieved.

Promote efficient industrialization of boilers. Focusing on cultivating a batch of boiler production backbone enterprises with strong innovation capabilities, independent intellectual property rights and brands, and core competitiveness in Bent Boiler, Chengyuan Heat Pump, etc., with the backbone enterprise as the core and the industrial chain as the link, “specialization "Special New Industry" supporting the industrial structure of SMEs to provide equipment and support for the transformation of coal-fired industrial boilers.

Magnetic Lifter

Introduction:

Magnetic Lifters have strong magnetic path made by strong NdFeB magnetic material which supply permanent power. Our permanent magnetic lifters are made use of in a variety of industries. Our permanent magnetic lifters can hoist iron, steel blocks, cylinder and others and provide a quick and convenient method of loading, unloading, and moving. Our permanent magnetic lifters are the most ideal lifting equipment for factories, warehouses, docks and transportation.

Manual Magnetic Lifter Features:

• Use to lift and transport steel and iron for factories, docks, warehouses, transportation and more.

• Turning the manual handle activates or turns off the magnet.

• Strong attraction gives this tool a powerful lifting ability while it`s small size and light weight makes it easy and safe to operate. Effective for long periods with no need for a power supply.

• The safe coefficient of magnet lifter is 3.5.

Specifications:

Features:

Zero electricity required

Forged hook for high mechanical strength and durability

Precision machined assembly block in single piece to enhance efficiency

Designed for safety and light weight

Fool proof locking system with an easy to use "on" and "off" lever

3 times rated capacity factor of safety to meet the safety standards as per international standards for under the hook devices

Test certificate for safety factor from government approved third party

No Maintenance and Operating cost

No damage to the work piece being lifted

Very Compact

Our Services

1.Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.

Magnetic Lifter

Magnetic Lifter,Permanent Magnet Lifter,Magnetic Hand Lifter,Magnetic Load Lifter

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com