Do you know the two working methods of the rear-mounted garbage truck?
The rear-mounted compact garbage truck is a kind of garbage special vehicle for loading and unloading rubbish from the back of the car. It can handle garbage in two ways, as follows:
The picture above shows the rear belt hanging rack turning mechanism: This garbage truck can hang two 240 liters/barrel trash can or one 480 litre/barrel trash bin at a time. It is mainly applicable to streets, districts, and schools that have trash cans. In the local area, the garbage bin is composed of a sealed garbage bin, a hydraulic system, and an operating system. The entire vehicle is fully sealed, self-contained, self-dumping, and sewage in the compression process all enter the sewage chamber, which completely solves the problem of secondary pollution in the garbage transportation process, with high pressure, good sealing, and convenient operation. Security and other advantages.
Above the figure with garbage bucket flip mechanism: This garbage truck main working principle is that the cleaners collect the garbage into the garbage flip bucket, when the filling bucket is full of garbage, the scraper opens, the skateboard drives the scraper together Move down, insert garbage into the crusher and compress it for the first time. The scraper is swiveled forwards to further compact the trash. After the scraper is in place, he moves up with the slide, compacts the refuse and loads it into the bin, and then returns to the starting position. The whole work process is automatically controlled. When the garbage is continuously filled and pressed, the push shovel under the action of the extrusion force overcomes the back pressure and gradually retreats to realize bidirectional compression of the garbage and evenly fills the entire garbage can.
Cooling tower fill is one of the most important components for exchange of gas and water in cooling tower.It is the major
parts to improve the efficiency of cooling tower and make sure the economy and safe operation.This kind of PVC Cooling Tower Fill pack with the advanced technical, long lifetime, low resistance, light weight.During the service, the fill can increase the water flow process. It is widely used in square cooling tower.
Also have other parts of cooling tower,such as Cooling Tower Spray Nozzle,Cooling Tower Air Inlet Louver,Cooling Tower Drift Eliminator.
There are many different types of cooling tower fill in our company.Different types with different sizes and patterns.We can do as customized.
Cooling Tower Parts,Marley Cooling Tower Parts,Marley Cooling Tower,Bac Cooling Tower Parts
Hebei Long Zhuo Trade Co., Ltd. , https://www.hblongzhuo.com