1. When installing the air compressor, it is necessary to have a wide lighting area for operation and maintenance.
2. The relative humidity of the air should be low, the dust is small, the air is clean and well ventilated, away from inflammable and explosive, corrosive chemicals and harmful unsafe items, avoiding places close to the dust.
3. When the air compressor is installed, the ambient temperature in the installation site should be higher than 5 degrees in winter and lower than 40 degrees in summer, because the higher the ambient temperature, the higher the air compressor discharge temperature, which will affect the performance of the compressor. If necessary, ventilation or cooling devices should be installed at the installation site.
4. If the factory environment is poor and there is a lot of dust, pre-filtering equipment must be installed.
5. The air compressor unit in the air compressor installation site should be arranged in a single row.
6. Reserved passages, those with conditions can install a crane to facilitate maintenance of air compressor equipment.
7. Reserve maintenance space, at least 70 cm or more between the air compressor and the wall.
8. The air compressor is at least one meter away from the top space.
Tapered Roller Bearings are mainly used to bear the radial load-based radial and axial joint load, generally should not bear the axial load alone. This type of bearing is designed so that the inner ring raceway surface, the outer ring raceway surface and the roller rolling surface of the conical surface of the vertex intersect the bearing center line.
Tapered Roller Bearings
Tapered Roller Bearings,Roller Bearing ,Thrust Bearing ,Taper Bearing
ZHEJIANG XCC GROUP CO.,LTD. , http://www.xccbearing.com